auna TT-186 DAB Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

LINE-OUT connction
You can connect this unit to your external Hi-Fi / AMPLIFIER system by
connecting the LINE OUT socket (20) to the auxiliary input socket of your
Hi-Fi / AMPLIFIER system with a RCA cable (not included).
Note: The Volume control will not function when using the LINE OUT.
Note: The Volume control will not function when using the LINE OUT.
Sleep function
1. Press the Sleep button (11) once.
2. Press the Skip up button (7) to adjust the sleep timer in the order of Off
> 15 > 30 > 45 > 60 > 90 minutes > Off respectively.
3. System will stop and go to standby mode automatically after running
the selected time.
4. To cancel the sleep mode, press Skip up / down button (7) until it
reaches "Off".
Using headphones (not included)
Inserting the plug of your headphones into the Headphone jack (8) will
enable you to listen in private.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR
HEADPHONES.
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your
unit.
3. Keep the volume at a reasonable level even if your headset is an open-
air type designed to allow you to hear outside sounds. Please note that
excessively high volume may still block outside sounds.
EN
29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10033426

Tabla de contenido