Safety Instructions; Correct Disposal Of This Product - Mastervolt AC Master 12/700 Manual Del Usuario Y De Instalación

Ocultar thumbs Ver también para AC Master 12/700:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
12
ENGLISH

1. Safety instructions

WARNING!
Read the entire manual before using the AC Master. Keep the manual at a safe location for
future reference.
Use the AC Master following the instructions and specifications stated in this manual.
Connections and safety features must be executed according to the locally applicable
regulations.
Operation of the AC Master without proper grounding may lead to hazardous situations!
Use DC-cables with an appropriate size. Integrate a fuse in the positive wiring and place it
nearby the battery. Refer to the specifications.
If the positive and negative wires on the DC-input (battery) are exchanged, the AC Master will
be damaged. Damage of this kind is not covered by guarantee. Check whether all connections
are connected correctly before placing the fuse.
Do not connect the AC-output of the AC Master to an incoming AC source.
Never connect the AC Master in parallel with any other inverter.
Never open the housing as high voltages may be present inside!
2. Liability
Mastervolt cannot be held liable for:
Consequential damage resulting from the use of the AC Master.
Possible errors in the included manual and the consequences of these.
Use that is inconsistent with the purpose of the product.
3. Warranty
Mastervolt assures the product warranty of the AC Master during two years after purchase, on the
condition that the product is installed and used according to the instructions in this manual.
Installation or use not according to these instructions may result in under performance, damage or
failure of the product and may void this warranty. The warranty is limited to the cost of repair and/or
replacement of the product. Costs for labour or shipping are not covered by this warranty.

4. Correct disposal of this product

(Waste Electrical & Electronic Equipment)
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused. When this crossed-out wheeled bin
symbol is attached to a product, it means the product is covered by the European
Directive 2012/19/EU.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences to the environment and human health.

Publicidad

Tabla de contenido
loading

Tabla de contenido