Prohibited Use Of This Power Tool - Evolution R185 SMS Li Instrucciones Originales

WARNING: The noise emissions during actual
use of the power tool can differ from the declared
values depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: The need to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
SAFETY LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
min (RPM)
-1
Speed
~
Alternating Current
n
No Load Speed
o
Wear Safety Goggles
Wear Ear Protection
Do Not Touch,
Keep hands away
Wear Dust Protection
Wear Hand Protection
CE Certification
UKCA Certification
TUV SUD Certfication
www.evolutionpowertools.com
Symbol Description
Waste electrical and
electronic equipment
Triman - Waste Collection
Keep away from heat and open
flames - Do not dispose in fire
Keep away from water - do not
immerse in liquids
Max temperature
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a Multi-material sliding
mitre saw and has been designed to be used with
genuine Evolution blades rated for this machine.
Only use blades designed for use in this machine
and/or those recommended specifically by
Evolution Power Tools Ltd.
WHEN FITTED WITH A CORRECT BLADE THIS
MACHINE CAN BE USED TO CUT:
• Wood, Wood derived products (MDF, Chipboard,
Plywood, Blockboard, Hardboard etc),
• Wood with nails,
• 50mm mild steel box section with 3mm wall at
HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note: Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note: Not recommended for cutting galvanised
materials or wood with embedded galvanised
nails. Cutting galvanised steel may reduce
blade life.
PROHIBITED USE
OF THIS POWER TOOL
WARNING: This product is a Multi-material sliding
mitre saw and must only be used as such. It must
not be modified in any way, or used to power any
other equipment or drive any other accessories
other than those mentioned in this Instruction
Manual.
4
Read Manual
WARNING
& Recycling
DC voltage