Product Presentation; Preparation; Installation And Connection; Presentation Of The Programs - TEFAL Cake Factory KD8121 Slim Manual De Instrucciones

EN

Product Presentation

1 2 3
1 On/Off button
2 Back button
3
Minus button (-)
4 Plus button (+)

Preparation

1. Remove all packaging, stickers and various accessories from both the inside and outside of
the appliance.
2. Before first use, carefully clean the different molds using some hot water and some washing-
up liquid, carefully rinse and dry.

Installation and Connection

Appliance start-up applies to all programs
1
3
30
7 8
6 4 5
5 OK / Start button
6 Control panel
7
Automatic programs
8 Manual program
1. Plug in your appliance.
3. Next, wait a few seconds before
pressing the On/Off button. The
first program flashes, indicating
the "Program Selection" mode.
2

Presentation of the Programs

If you are unsure of which cooking mode to use, please refer to the Cooking Guide, page 38.
1 2 3
1 2 3
5 Automatic Programs:
1 Cakes to share program
2 Individual cakes program
3 Lava cake program
4
Meringue program
Cooking Tip: There is a program suited for each recipe type. Depending on the selected
program, a default cooking time is indicated. There are several recipes per program. For this
reason, it may be necessary to adjust the time based on the chosen recipe (see the list of
recommended times per recipe). Preheating is not required, and cooking starts when the
program is launched, once the appliance is closed and start has been pressed.
Caution: To ensure best results, it is essential to follow the recipe and to respect the proportions.
5 *
4
6
5 *
4 6
5 Chocolate melting* or dairy desserts/
mousses* programme
6 Manual program
*Depending on model
EN
31