Choosing The Cooking Program; Using An Automatic Program; Using The Manual Program - TEFAL Cake Factory KD8121 Slim Manual De Instrucciones

EN
A. Choosing the Cooking Program
1
B. Using an Automatic Program
1
3
5
32
Once the preparation has been
poured into the mould and the cover
has been closed:
1. Scroll through the cooking
programs using the – and +
buttons.
2. The chosen pictogram flashes.
2
3. Press the OK button to confirm.
1. Once the cooking program is
selected, the corresponding
indicator light is solidly lit.
2. A default cooking time flashes.
3. Press the + and – buttons to
modify the time, if required.
4. Ensure that the lid is closed. Press
the Start button to confirm and
2
start cooking. The time display
stops flashing.
5. Cooking has started. The graphic
on the screen's left indicates that
a cooking cycle is under way and
that the appliance is heating.
The time counts down by the
minute, and then by the second
during the last minute.
4
Note: Each subsequent time the
appliance is used, the time displayed
defaults to the previous time used.
C. Using the Manual Program
1
3
5
7
9
1. Once the cooking program is
selected, the corresponding
indicator light is solidly lit.
2. A default temperature flashes.
3. Press the + and – buttons to
modify the temperature, if
required.
2
4. Press the OK button to confirm.
5. A predefined cooking time
flashes.
6. Press the + and – buttons to
modify the time, if required.
7. Press the Start button to confirm
and start cooking, and the time
display will stop flashing.
4
8. Cooking has started. The graphic
on the screen's left indicates that
a cooking cycle is underway and
that the appliance is heating.
The time counts down by the
minute, and then by the second
during the last minute.
9. At any time, if necessary to
6
adjust the time and/or the
temperature*, press the "back"
key depending on model*
10. Press the OK button to confirm.
Note: Each subsequent time the
appliance is used, the time and
temperature displayed default to the
8
previous time and temperature used.
*Depending on model
EN
33