R , R And T; Entry Digit Limit For; Function Parameters For; C , C And A - Sharp XE-A21S Manual De Instrucciones

Entry digit limit for

r R
• For , enter 0 to 9 (digits), and for
t
and 7 for are set.
Entry digit limit is in effect for REG mode operation but can be overridden in MGR mode. The entry digit limit
is represented by the number of allowable digits for maximum entry or total amount. When "0" is set, the
operation of the corresponding key is prohibited.
Key operation example

Function parameters for

*1:Item:
A Footer printing
B Amount tendered entry
C Entry digit limit
Footer printing
• This option decides whether or not the machine should print a message at the bottom of a receipt when a
specified media key is used. To program a footer logo message, refer to "Logo messages" section on
45.
Amount tendered entry
• You may select amount tendered, compulsory or optional, for the
• You may select amount tendered, compulsory or inhibited, for the
Entry digit limit
c C
• For the and
program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is
in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented
by the number of allowable digits for the maximum entry or total amount. When "0" is set, the operation of the
corresponding key is prohibited.
Key operation example
40
r R
, and
@
Entry digit limit
t
@
4
R A
C c
,
To program "0" for all items
@
1
* ABC
To program for another key
keys, program upper limit entry amount for the tendered amount. For the
@
018
C A
t
r R
,
or
(manual tax), enter 0 to 7 (digits). By default, 9 for
A
and
(when using as CA key)
2
*
s C c
,
or
s
2
* :Press key for CA key setting.
Selection:
Allow
Disallow*
Compulsory
Non-compulsory (for the CA or CHK keys)*
Inhibit (for the CH key)*
A
c
t A
(only for manual entry)
Print
A
Entry:
1
0
1
0
0
0-8 (default: 8)
C
and keys.
key.
Print
ABC (A:0, B:1, C:8)
r R
and
page
A
key,