Electronic Journal (Ej) Programming; Ej Memory Type - Sharp XE-A21S Manual De Instrucciones

Consecutive numbers
s 2
Key operation example
1000

Electronic Journal (EJ) Programming

2
The cash register provides the electronic journal (EJ) function. By default, a maximum of 2000 lines can be
stored in memory. If you want to store more journal data, you can expand to a maximum of 3000 lines, although
the maximum number of PLUs is decreased to 200 codes because the memory is shared with PLU settings.
You can also program various options for EJ, such as availability of EJ memory nearly full warning, availability of
printing EJ data during a transaction, data type to be stored in memory, and printing format.
For reading journal data, refer to "EJ REPORT READING AND RESETTING"

EJ memory type

When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
s
*A: 0 for EJ 2000 lines and PLU 1200 codes (default)
1 for EJ 3000 lines and PLU 200 codes
Key operation example
To begin the count from 0001
@
A number (one to four digits) that is one
less than the desired starting number
s @
2
s A
90
s @
90
A
1
Print
(page
@ A
*A
Print
s A
Consecutive
number
62).
47