Panasonic FZ-G2 Serie Instrucciones De Funcionamiento página 15

4
E
F
<For tablet>
4
4 Turn on the computer
Press and hold the power switch
IMPORTANT
l Do not press the power switch repeatedly.
l Do not perform the following operation until the First-time Operation is completed.
Ÿ <Only for model with keyboard base> Touching the release lever (E) and detach lock (F)
Ÿ <Only for model with keyboard base> Detaching the tablet from keyboard base
Ÿ Disconnecting the AC adaptor
Ÿ Pressing the power switch
Ÿ <Only for model with keyboard base> Closing the display
Ÿ Any changes from the default setting of the Setup Utility
l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.
l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait
until the computer cools down, and then turn the power on again. If the computer does not power on even af-
ter cooling down, contact Panasonic Technical Support (è
5 Setup Windows
Select language and click [Yes].
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the touchscreen, external keyboard or external
mouse, and wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a
malfunction. Wait for a moment until the Windows setup screen appears.
l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item.
l Setup of Windows will take approximately 5 minutes.
Go to the next step, confirming each message on the display.
l You can set the Wireless Network after the setup of Windows is complete.
If "Let's connect you to a network" is displayed, you can select [I don't have internet].
If "There's more to discover when you connect to the internet" is displayed, you can
select [Continue with limited setup].
If "Connect now to quickly get started on your device" is displayed, you can select [Con-
tinue with limited setup].
l We recommend that you set the password after the setup of Windows in complete.
IMPORTANT
l You can change the user name, image and security setting after setup of Windows.
l Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from
A to Z, and the hyphen (-) character. Do not use the following words and characters for user name: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space.
If the error message "The computer name is not valid" appears, check if characters other than the above are
not entered. If the error message still remains on the display, set the key entry mode to English ("ENG") and
enter characters.
until the power indicator lights.
Operating Instructions - Reference Manual).
has turned off.
15