General Description - HT EQUITEST Manual De Instrucciones

2 GENERAL DESCRIPTION

The EQUITEST accessory is designed for carrying out the continuity measurement of
protective and equipotential conductors with test current> 10A AC in combination with
the following models of test instruments (MASTER unit) of the HT family. EQUITEST can
be used in combination with the following HT safety
Model (*)
COMBI519
COMBI521
EASYTEST
SUPERCOMBIS
(*) The list of available models can be changed without notice. In case of doubt contact the after-sales service
The accessory uses the 4-terminal measurement method that allows self-compensation
of the resistance of the test cables and therefore their extension without the need to
perform any preliminary calibration
The followed features are available:

Continuity of protective and equipotential conductors with current> 10A AC and no-load
voltage <24V AC
 Power supplies available: 110V ± 10% or 230 / 240V ± 10%
 LED indications for measurement execution control
 Connection via optical/USB cable to MASTER units
 Detection of Manual and Automatic operating modes
 WiFi connection to mobile devices via the HTAnalysis APP
 Input protection fuse
testers:
Connection
Optical with cable C2050
EN - 4
EQUITEST
FW version
2.01 (or higher)