Preparation For Use; Initial Checks; Power Supply; Storage - HT EQUITEST Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

3 PREPARATION FOR USE

3.1

INITIAL CHECKS

Before shipping, the accessory has been checked from an electric as well as a mechanical
point of view. All possible precautions have been taken so that the accessory is delivered
free of damage. However, a thorough check of the accessory is recommended to detect
any damage suffered during transport. In case anomalies are found, immediately contact
the forwarding agent. Also check whether the packaging contains all parts indicated in §
7.4. In case of discrepancy, please contact the Dealer. Should the accessory be returned,
please follow the instructions given in § 8.
Should the accessory be used differently from what is specified by the
manufacturer, the protection provided may be impaired
3.2

POWER SUPPLY

The accessory is powered by 230VAC, 50/60Hz (default condition) or 110VAC, 50/60Hz
via the supplied plug
Check that the rated operating voltage value indicated on the back label
should be consistent with the power supply voltage of the system under
test
3.3

STORAGE

To guarantee accurate measurement, after a long storage time, wait for the accessory to
come back to normal condition (see § 7.3).
cable.
CAUTION
CAUTION
EN - 5
EQUITEST

Publicidad

Tabla de contenido
loading

Tabla de contenido