Preparation For Use; General Information; Initial; Power Supply - HT QuickLAN 6055 Manual De Instrucciones

3. PREPARATION FOR USE

3.1.

GENERAL INFORMATION

This is a precision instrument. To guarantee its performances be sure to use it or keep it stored
on suitable environmental conditions. Do not expose it to high temperatures or humidity or
direct sunlight. Be sure to turn it off after use. If you expect not to use the instrument for a
long period remove batteries to avoid leakages of battery liquid which could damage the its
inner components.
3.2.

INITIAL

This instrument was checked both mechanically and electrically prior to shipment. All
possible cares and precautions were taken to let you receive the instrument in perfect
conditions. Notwithstanding we suggest you to check it rapidly (eventual damages may
have occurred during transport).
Make sure that all standard accessories mentioned in paragraph 6.4.1 are included.
Should you have to return back the instrument for any reason please follow the
instructions mentioned in paragraph 7.
3.3.

POWER SUPPLY

The instrument is powered by battery (refer to paragraph 6.2.3 for details on model and
battery life). When battery is low (refer to paragraph 6.2.3), a low battery indication is
displayed. Don't replace the battery while the instrument is connected to the plant.
Only skilled technicians can open the instrument and replace batteries.
Before removing batteries disconnect the test leads from any energized
circuits to avoid electrical shocks.
1. Switch off the instrument and remove the cable from the input socket.
2. Press the battery cover and push in the direction of the arrow to open.
3. Remove the battery.
4. Replace the battery with a new one of the same type (refer to paragraph 6.2.3)
observing the proper polarities.
5. Replace the battery cover.
6. Use the appropriate battery disposal methods for your area.
3.4.

CALIBRATION

The instrument complies with the technical specifications contained in this manual and
such compliance is guaranteed for 1 year. Afterwards the instrument may need
recalibration.
3.5.

STORAGE

After a period of storage in extreme environmental conditions exceeding the limits
mentioned in paragraph 6.3 let the instrument return to normal measuring conditions
before using it.
3.6.

CLEANING

To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.
CAUTION
EN - 4
QuickLAN 6055