Handling And Operation; Filling The Water Tank - Beem CM9402EB-GS Manual Del Usuario

EN
1. Fully unwind the connecting cable.
2. Place the device on the kitchen unit or another dry, solid, fl at, heat-resistant and splash-proof
work surface. Ensure there is suffi cient clear space on all sides (at least 20 cm to the sides and
30 cm above).
3. Plug the mains plug into a plug socket.

Handling and Operation

Filling the Water Tank

1. Open the lid (1).
2. Pour the quantity of water required for the number of cups you want (maximum 8 cups) into
the water tank (3). Only ever use water to make coffee; do not pour milk or other
liquids into the water tank!
3. Close the lid. You must hear and feel it engage.
All of the water in the water tank is always used.
Pouring In Coffee Powder
1. Open the lid (1).
2. Insert the fi lter insert (10) into the fi lter compartment (8).
3. Insert the permanent fi lter (11) or a fi lter paper (size 1x4) into the fi lter insert.
4. Add the quantity of coffee powder you want to the fi lter directly. We recommend one level
coffee measuring spoon for each 125 ml cup.
5. Close the lid. You must hear and feel it engage.
Drip Stop
The device has a drip stop (9) which prevents water from dripping out of the fi lter compart-
ment (8) when the thermal jug (6) is removed from the device.
When the device is in operation, the lid (1) must be closed and the thermal jug with the lid (7)
placed on it must be placed beneath the fi lter compartment. The lid of the thermal jug pushes the
drip stop upwards and the coffee can fl ow from the permanent fi lter (11) through the lid into the
thermal jug.
During the brewing process, the thermal jug must not be removed from the main unit (4)
for longer than 30 seconds as otherwise the permanent fi lter could overfl ow.
20