Brand Code Search - One for All OARN08G Guia Del Usuario

All manuals and user guides at all-guides.com
four times and the last programmed code under that device
method.
Testing the Code for Maximum Functionality
1. Try a variety of the device's functions with the remote. If
some device features don't work, go to the next step to try
a different code.
2. Repeat the Auto Code Search Method from the beginning.
When your device turns off, do not stop searching. Instead,
with the unit now off, continue to press the SLOW key
every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the SKIP BACK key on
the remote every 2 seconds until your device turns off
again. When your device turns off again, press the OK key.
4. Test the key's functionality again by attempting to control
a variety of the device's functions. If the code that has
been stored controls the majority of the device's functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.

Brand Code Search

The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
IMPORTANT:
programming method for these kinds of devices.
TIPS:
assign them to a device type. See the Assigning the AUX1 and
AUX2 Keys section.
1.
Manually turn on the device you want to control.
2.
Find your device's brand in the Brand Code list section of
the accompanying code list. Circle the number for your
brand and keep the list handy.
4