Before Initial Use - Beem CM9402EC-GS Manual Del Usuario

19
WARNING – Danger of Fire
• Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
• Do not use the device in conjunction with extension cables.
• Do not operate the device in the vicinity of combustible materials. Do not place any combus-
tible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
• Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm. When you pull it out of the
plug socket, always pull on the mains plug and never the mains cable!
• Never pull or carry the device by the connecting cable.
• Regularly check the glass jug for scratches or cracks. Do not use the glass jug if it is damaged.
• Do not place the glass jug down on a hot stove.
• Do not pour very cold water into the glass jug or the hot water tank.
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture and impacts.
• Never place any heavy objects on the device or the connecting cable.
• Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.

Before Initial Use

1. Wipe the device with a clean, damp cloth. Clean the glass jug, the thermal jug, the fi lter
insert (11) and the permanent fi lter (12) with detergent and warm water.
2. Set up the device and connect it (see the "Set-Up and Connection" chapter).
3. Before you enjoy your fi rst coffee, we recommend that you carry out a trial run without
coffee powder to remove any possible production residues on the device and in the water
system. To do this, follow the instructions in the "Handling and Operation" and "Preparation"
chapters.
When the device is fi rst used, production-related additives may cause a small amount of
smoke and / or an odour to be produced. This is normal and not a device defect.
4. Repeat this process twice. Do not drink this water!
5. Clean the device and accessories (see the "Cleaning and Care" chapter).
EN