Special Safety Instructions - Stocker E-200 LA Manual De Instrucciones

3
11. Proper operation of the chainsaw reduces the possibility of accidental contact with the
chain in motion.
12. Lubricate, tighten the chain and replace the accessories according to the instructions. Im-
proper tensioning or lubrication can cause breakage or increase the chance of kickback.
13. Keep the handle dry, clean, free of oil and grease stains. A greasy handle increases the
chances of losing grip and therefore losing control of the tool.
14. Only for cutting wood. Do not use it for purposes other than that for which it was designed.
For example, do not use the chainsaw to cut plastic, stone, or non-wood building materials.
Using the chainsaw for operations other than its intended purpose may cause hazards.
Bar safety instructions
The bar is safe to use if it meets the following conditions:
1. The functions of the bar are intact.
2. The bar is not deformed or incomplete.
3. The depth of the groove of the bar does not show obvious variations.
4. The groove of the bar is smooth and burr-free.
5. There is no narrowing or cracking in the groove of the bar.
Warning!
If the bar is not in good condition, it will not fit the chain well. The chain may jump off the bar,
causing serious injury or death.
1. Use only if the bar is not damaged.
2. If the groove of the bar is less than the minimum depth, replace it.
3. Clean dirt from the bar before operating the chainsaw.
174
Art. 318
Chainsaw Magma E-200 LA
Instructions for safe use
Art. 318
Chainsaw Magma E-200 LA
Instructions for safe use
Safety instructions for the chain
The chain is safe to use if it is in the following condition:
1. The chain is not damaged.
2. The cutting edges of the chain cutters are sharp.
3. The notch depth of the cutting heads' cutting edges meets the service requirements.
4. The length of the cutting heads' cutting edges meets the grinding requirements.
Warning!
If the parts and accessories do not meet the safety standards, they cannot perform the proper
functions and the safety device will no longer be effective, resulting in serious personal injury
and even death.
5. Do not use damaged chains.
6. The grinding of the cutting heads must be in line with the criteria of the instruction manual.
7. Please contact your local dealer or Stocker Srl if you have any questions.

Special safety instructions

1. Keep the tool at least 40 cm away from all parts of the body.
2. Do not remove cut branches while the chain is moving.
3. Do not hold objects in your hand that you intend to cut.
4. Only remove cut branches when the power is off.
5. When using the pruning chainsaw, a slight oversight may result in serious personal injury.
6. Always move the chainsaw around using the handle and when the chain is stopped.
7. Careful use of the chainsaw reduces the risk of injury from the chain.
For further information about the product, please contact info@stockergarden.com
3
175