Symbol And Label Information - Nikon Optos Monaco P200TE Guia Del Usuario

1.11 Symbol and label information

Symbol and label information
Switch -
OFF
Switch -
ON
Protective earth terminal.
Danger: high voltage warning.
Warnings are directions which, if
Fatal or serious injury to a user, engineer, patient or any other person.
l
Damage to the equipment described in this manual and/or other equipment or goods.
WARNING
l
Environmental pollution.
l
Cautions are directions which, if
A hazardous situation for a user, engineer, patient or any other person.
l
CAUTION
Damage to the equipment or loss of data.
l
Interference may occur in the vicinity of equipment marked with this symbol.
Laser device present. This symbol is used internally. Only Optos trained personnel are
permitted to service the device. Under normal use, operators should never see this symbol.
Date of manufacture.
Manufacturer.
Type B - relates to the allowable maximum current leakage which can flow from the applied
part. The limits for this are defined in IEC 60601.
SN
Serial Number.
In accordance with Directive 93/42/EEC.
0197
Consult accompanying documents.
Disposal in compliance with WEEE Directive.
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
position.
position.
followed, could cause:
NOT
followed, could cause:
NOT
Chapter 1 - Warnings and cautions
Page 19 of 76
English