Using The Hand Control; Table 3: List Of Hand Control Buttons; Figure 3: Hand Control - Nikon Optos Monaco P200TE Guia Del Usuario

For Chinese, Japanese, and Korean, the keyboard interfaces with the Microsoft IME to allow Asian character
input.
The IME uses the default configuration, which can be changed as desired in Windows.
l
Shortcuts or key combinations can be used within the IME, as long as the keys are present on the on-
l
screen keyboard. However, alphabetic letter keys might not work in these situations.
For Japanese:
l
The Space bar is used for conversion and re-conversion.
l
F6-F10 are used to quickly change a converted phrase to a specific character type.
l
If you need to select more than one character for reconversion, hit Shift + arrow key for each
l
character.

3.1.3.3 Using the hand control

The hand control is used to adjust the scan head XYZ alignment. When capturing OCT scans the hand control
can also be used to adjust the scan.

FIGURE 3: Hand control

TABLE 3: List of hand control buttons

Control Description XYZ mode
Toggle between XYZ and OCT adjustment
modes when capturing OCT scans.
Lower chin rest.
Raise chin rest.
Fine adjustment left, right, up and down.
Fine adjustment to move the alignment system
further from the patient.
Fine adjustment to move the alignment system
closer to the patient.
Press the top button on the hand control to
capture an image.
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
Description OCT mode
Toggle between XYZ and OCT adjustment
modes.
Move the position of the OCT scan towards
the choroid.
Move the position of the OCT scan towards
the vitreous.
Move the scan within the frame and center
the scan on the desired area.
Move the focus within the OCT scan
towards the choroid.
Move the focus within the OCT scan
towards the vitreous.
Press the top button on the hand control to
capture a scan.
Chapter 3 - How to...
Page 33 of 76
English