Servicing; Warranty; Cleaning - Nikon Optos Monaco P200TE Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Chapter 3 - How to...

3.4.7.1 Servicing

Do
NOT
inside.
Only Optos trained personnel are permitted to install and service the device.
CAUTION
Do
NOT

3.4.7.2 Warranty

The details of your warranty are included in your contract.

3.4.7.3 Cleaning

Wear powder-free gloves at all times when cleaning the device including the scan head
and main mirror. If the gloves become contaminated they must be replaced immediately.
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see Cleaning before each patient on the facing
page.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.
Improper cleaning methods or use of inappropriate cleaning and disinfecting agents can
result in the following:
l
l
l
Always follow the cleaning and disinfecting agents' manufacturer's instructions and
precautions; for storage, method of application, protective gloves, shelf life and disposal
CAUTION
to help assure effective and safe use of the product.
Do
NOT
scan head. Always allow cleaned areas to air-dry.
Do
NOT
the manufacturer.
Do
NOT
Do
NOT
If you believe cleaning sprays or liquids have got into the equipment, disconnect the
power supply and have the equipment checked by Optos qualified service personnel.
Do
NOT
Do
NOT
General cleaning
Be careful
CAUTION
Page 56 of 76
English
open the scan head covers. There are no user serviceable or replaceable parts
service the device when imaging a patient.
Damaged equipment
Poor imaging performance
Increased risk of electric shock
use lint cloths, tissues, or other materials that may create dust, on or near the
use harsh detergent, abrasive cleaners or solvents that are
expose equipment parts to steam or sterilizers as this will damage the device.
allow liquids to get into the equipment.
let the cleaning wipes come into contact with the inside of the instrument.
use the equipment until you have confirmed it is safe to use.
to damage the scan head covers when cleaning.
NOT
recommended by
NOT
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido