Use Standby Mode At The End Of Each Day; Shut Down The Scan Head; Log Off The Image Server Each Day; Restart The Image Server Each Week - Nikon Optos Monaco P200TE Guia Del Usuario

Browser-based review clients have to be on the same network as the scan head and the image server. Usually,
browser-based review clients have been logged off at the end of each day. To login to a browser-based review
client:
1. Press [Ctrl]+[Alt]+[Del]
2. Type your username and password. Select
3. Connect to the
OptosAdvance
4. Enter your username and password when prompted. Usernames and passwords are assigned by your
System Administrator, see Managing user details on page 53 (all passwords are case sensitive).

3.1.2 Use standby mode at the end of each day

The scan head be put into standby mode at the end of each working day.
MUST
Note
You should follow the correct procedure in order to protect the integrity of the information on the disk
l
drives.
You should back-up your image server data at least once a week.
l
You put the scan head into standby mode at the end of each working day.
MUST
1. End the current session and select
2. The status indicator will turn blue when the device is in standby mode. The touch screen will switch
when the device is in standby mode.
OFF
3. Place the fabric cover over the scan head after the scan head is in standby mode.

3.1.2.1 Shut down the scan head

You should usually have to shut down the scan head.
NOT
1. Follow the instructions to put the scan head into standby mode, see Use standby mode at the end of
each day above .
2. When the status indicator has turned blue you can turn
located at the at the back of the scan head. The

3.1.2.2 Log off the image server each day

You should log off the image server at the end of each day.
1. Exit OptosAdvance.
2. Select the "Windows" button.
3. Select Log off
.
Note
Image files cannot be viewed on browser-based review clients when the image server has been shut
l
down.
Restart the image server each week to allow updates to install, see Restart the image server each
l
week below .

3.1.2.3 Restart the image server each week

Exit OptosAdvance
CAUTION
You should restart the image server each week to allow updates to install.
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
Unlock Computer
to display the
OK
.
URL from your browser.
on the touch screen to put the device into standby mode.
OFF
before turning the image server.
OFF
dialog box.
the power supply. The power switch is
OFF
position is marked " ".
Chapter 3 - How to...
Page 31 of 76
English