Installation Instructions; Tools And Materials - KALLISTA P21510 Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
WARNING: Risk of scalding. High water temperature can cause severe burns. Set the water temperature
at or below 120°F (49°C) following the adjustment procedure in the valve Installation Instructions.
‰ Prior to installation, unpack the new showerhead and inspect it for damage. Return the showerhead to its
protective carton until you are ready to install it.
‰ Observe all local plumbing and building codes.
‰ Shut off the water supply.
‰ The appearance of your product may differ from what is shown in these instructions, however, the
installation procedure is the same.
‰ KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
1491051-2-A
2 of 7
THANK YOU FOR CHOOSING KALLISTA
IMPORTANT IMFORMATION

TOOLS AND MATERIALS

Raindome Showerhead
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com