Taking a still picture
1. Adjust the focus:
Normally the camcorder can auto focus without adjusting focus. If you want to take close-
up pictures, you can push the Joystick button up to switch to Macro mode (
2. Zooming:
Move the Zoom button up or down to zoom in or zoom out the screen.
3. For better image quality, it is recommended that you hold the LCD panel steadily to avoid
the image from blurring caused by hand shake.
4. Press the Shutter button half way down and hold for
the camcorder to auto focus. When the focus frame
turns green, press the button fully down to take a still
picture.
The picture aspect ratio is 16:9.
5. When taking long distance pictures with the digital zoom function, the use of a tripod
is recommended to minimize the slight blurring camera shake caused by subtle hand
motion.
Continuous shots
While in preview mode you can capture continuous images (at video resolution) by
pressing the joystick straight (OK key). The camcorder will continuously snap 10
pieces of shots per click until the memory is full.
Still picture and continuous shots function are
not available in WQVGA 240f.
Downloaded From VideoCamera-Manual.com Manuals
All manuals and user guides at all-guides.com
).
focus frame
OK key /
Joystick 5-way
7 7