Preset - Samsung SCC-C4205 Guia Del Usuario

✔
RS-485 : Sets up RS-485 Communication Protocol, Address,
and Baud Rate.
(SPECIAL)
LANGUAGE ENGLISH
CTRL TYPE A
POSI/NEGA +
D-ZOOM 1
DIS OFF
DIGITAL ZOOM OFF
REVERSE OFF
RS-485 OFF
DETAIL (1)-I--
V-SYNC INT
RET
✔
DETAIL : Controls the horizontal or vertical distinction.
✔
V-SYNC : INT shall be selected to use internal
synchronization. LINE... is used to synchronize several
camera phases for the multi camera operation by using an
external signal(AC signal). As there may be a slight
deviation between sets, adjusts PHASE to overcome this
handicap. When you use AC power source, V-SYNC is
available. Select LINE... and press [ENTER] and the
PHASE control submenu will appear. The PHASE control
ranges from -106H to +106H as for NTSC and from -138H
to +138H as for PAL.
❖ In case of DC power source, the V-SYNC menu is
marked --- so that setup is unavailable.
(SPECIAL)
LANGUAGE ENGLISH
CTRL TYPE A
POSI/NEGA +
D-ZOOM 1
Press the
DIS OFF
DIGITAL ZOOM OFF
REVERSE OFF
RS-485 OFF
DETAIL (1)-I--
V-SYNC INT
RET
29
All manuals and user guides at all-guides.com
(RS-485)
Press the
ENTER
button.
PROTOCOL SAMSUNG
BAUD RATE 9600
ADDRESS 0
RET
(LINE LOCK)
ENTER
button.
PHASE (000) ----I----
RET
❙

PRESET

Select the PRESET menu and press [ENTER] and the
PRESET MAP submenu screen will appear.
(PRESET MAP)
0 H 1 2 3 4
5 6 7 8 9
10 11 12 13 14
Press the
15 16 17 18 19
20 21 22 23 24
ENTER
25 26 27 28 29
30 31 RET
HOME RETURN OFF
EXIT QUIT
Select the PRESET number and press [ENTER] and the
above screen will appear.
✔
POSITION SET : Memorizes the position of ZOOM or
FOCUS.
✔
PRESET ID : Designates the ID on the basis of the
PRESET position as the CAMERA ID.
❖ HOME RETURN automatically returns to the HOME
position should there is no key input for a certain time.
The HOME position is set to PRESET 0 if it is saved or
Off if not.
HOME RETURN Time Setup
©
OFF © 1MIN © 2MIN © 3~60MIN © 2 HOUR © 3~12 HOUR
PRESET NO. 0
POSITION SET ...
PRESET ID OFF
button.
EXIT QUIT
E
30