Connections; Connecting Speakers And Source Components - Yamaha R-S700 Manual De Instrucciones

Ocultar thumbs Ver también para R-S700:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 232

CONNECTIONS

Connecting speakers and source components

CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner's manual for each of your components.
• Use RCA cables for audio components (except for speaker connections and DOCK jack connections).
• The IMPEDANCE SELECTOR must be set to the appropriate position before connecting speakers. See page 11 for
details.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.
Turntable
Audio
out
Audio
Audio
out
out
CD player
VCR, etc.
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
10
En
All manuals and user guides at all-guides.com
CONNECTIONS
Tape deck
Audio
Audio
GND
out
in
Audio
Audio
out
in
DVD player,
CD recorder,
etc.
For information
about other
components that can
be connected to this
unit, see page 27.
Audio
out
Subwoofer
etc.
Speakers A
Speakers B

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

R-s500

Tabla de contenido