Kärcher G 2600 VH Manual De Instrucciones página 15

Symptom Cause
Pump is noisy. Pump is sucking air.
Water leaks from Loose fittings.
pump (up to 10
Water seals are damaged or worn. Call Customer Support
drops per minute is
Thermal protection device is activat-
permissible).
ed.
Oil Drip. Oil seals are damaged or worn.
If you encounter any additional difficulties not list-
ed, please call for help or visit our website.
USA / Canada: 1-800-537-4129
www.karcherresidential.com
Canada: 1-800-537-4129
www.karcher-canada.com
Mexico: 01-800-024-13-13
www.karcher.com.mx
All manuals and user guides at all-guides.com
Solution
Check that hoses and fittings are air tight.
Turn off machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through the nozzle.
Tighten fittings.
Thermal protection device will auto reset.
Do not run pump for more than 5 minutes
without spraying.
Call Customer Support
15
English