Interrupting Operation; Storing The Appliance; Frost Protection; Transport - Kärcher ProHD 100 Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
– A firm grip impedes blood circulation.
– Continuous operation is worse than an
operation interrupted by pauses.
In case of regular, long-term operation of
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb fin-
gers) please consult a physician.
Operation
ProHD 200 must only be operated in a hor-
izontal position (power switch at the top).
The other appliance versions can be oper-
ated in the horizontal or upright position.
Note:
The appliance is equipped with a pressure
switch. The motor starts up only when the
lever of the pistol is pulled
 Set the appliance switch to "I".
 Unlock the trigger gun and pull the lever
of the gun.

Interrupting operation

 Release the lever of the trigger gun; the
device will switch off.
 Release again the lever of the trigger
gun; the device will switch on again.
Turn off the appliance
 Set the appliance switch to "0".
 Disconnect the mains plug from the
socket.
 Shut off water supply.
 Activate trigger gun until device is pres-
sure-less.
 Press the safety lever of the trigger gun
to secure the lever of the pistol against
being released accidentally.

Storing the Appliance

 Place the spray lance with the trigger
gun into the quiver for the spray lance
and snap it into place in the spray lance
holder.
 Wind the connection cable around the
cable holder.
 Fasten the plug with the mounted clip.
Appliances with push handle and
wheels:
 Slide in push handle.
 Wind up the high-pressure hose and
hang it over the hose storage.
16
All manuals and user guides at all-guides.com
ATTENTION
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
If you cannot store it in a frost-free place:
 Drain water.
 Pump in conventional frost protection
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
 Operate device for max. 1 minute until
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
 Hold the appliance at the carrying han-
 When transporting in vehicles, secure
Appliances with push handle and
wheels:
 For transport over longer distances, pull
 In order to climb stairs, pull the appli-
Appliances with carrying belt:
Risk of injury due to machine dropping.
Check the carrying belt for damage prior to
using it.
 Put the carrying belt over your shoulder
 Attach the connecting piece of the sur-
 Unscrew union nut.
Note:
With the ProHD 200 the holder can only be
used for a nozzle with screw connection.
– 4
EN

Frost protection

agents through the appliance.
the pump and conduits are empty.

Transport

CAUTION
dle and the recessed grip for carrying it.
the appliance according to the guide-
lines from slipping and tipping over.
out the push handle to the end position
and drag the appliance behind you
holding the push handle.
ance up step by step. The skids protect
the casing from damage.
CAUTION
and carry the appliance.
Holder for surface cleaner
face cleaner to the holder on the high-
pressure cleaner.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Prohd 200Prohd 300Prohd 400Prohd 600

Tabla de contenido