Activating And Deactivating Bluetooth® Radio Interface; Assembling The Lawn Mower; Attaching The Handlebar; Assembling The Grass Catcher Box - Stihl RMA 443 VC Manual De Instrucciones

Ocultar thumbs Ver también para RMA 443 VC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
English
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
lights up blue for about 3 seconds. The
®
Bluetooth
radio interface on the battery is
activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
flashes blue for six times. The Blue‐
®
tooth
radio interface on the battery is deacti‐
vated.
8
Assembling the Lawn
Mower
8.1

Attaching the Handlebar

► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Press sleeve (1) into the bores in upper han‐
dlebar (2).
► Fit spring washers (3) with the convex side
facing inwards onto sleeve (1).
36
Radio
®
®
" LED next to the sym‐
®
" LED next to the sym‐
7 Activating and Deactivating Bluetooth® Radio Interface
®
► Guide upper handlebar (2) into handlebar
bracket (4).
► Push bolt (5) through the bores in handlebar
®
bracket (4) and the sleeve in upper handle‐
bar (2).
®
► Place nut (6) in the notch in handlebar
bracket (4).
► Tighten bolt (5).
► Press cable (7) into holders (8).
► Fasten cable (7) to the handlebar using cable
clip (9).
The handlebar must not be dismantled again.
8.2
Assembling, Attaching and
Detaching the Grass Catcher
Box
8.2.1
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).

Assembling the Grass Catcher Box

0478-131-9948-D

Publicidad

Tabla de contenido
loading

Tabla de contenido