7. Clearing locking authorisations
7.1 Erasing the locking authorisation of an individual user key
Prerequisites:
1. Hold the clearing key card in front of the anten-
na.
Acoustic signal is heard. LED flashes red for
max. 5 seconds.
7.2 Clearing locking authorisations for all user keys
If a user key is lost, the locking authorisations of all user keys must be cleared. The locking
authorisations can then be granted again
Prerequisites:
1. Hold the clearing key card in front of the anten-
na.
Acoustic signal is heard. LED flashes red for
max. 5 seconds.
52
Tag-it ™ISO
Clearing key card
x
5 s
Tag-it ™ISO
Clearing key card
x
5 s
User key with locking
authorisation to be cleared
2. Hold the user key in front of the antenna during
this 5-second period.
Acoustic signal is heard. LED briefly
illuminates red.
Locking authorisation of this user key is
cleared.
6. Programming user keys, page 48.
Tag-it ™ISO
2. Hold the programming key card in front of the
antenna during the 5-second period.
Acoustic signal is heard. LED briefly
illuminates red.
The locking authorisations of all user keys
are cleared.
1 s
Programming key card
1 s