MSK-150_09092003.qxd
Required for installation:
– Measure
– Prick punch
– Hammer
– Drill bits
Required for electrical connections and testing:
- Diode test lamp (see B 8)
or Voltmeter
– Crimping pliers (see B 10)
– Isulation Tape
For securing the receiver and cables, you may also need bolts,
metal crews and cable binders.
The magic safe alarm system MSK-150 provides many advanced
features, some of which may be dependent on the systems already
available in your vehicle. Some features are optional. The alarm system
is construed for an on board supply system of 12 V.
The magic safe is a microprocessor controlled alarm system designed
to help protect vehicles and their contents from being stolen. When
armed, the alarm system will trigger if door, boot, bonnet is opened or
the ignition is turned on.
The alarm protects the vehicle by sounding the sirene of the compact
unit for 30 seconds.
Important note! The default pin code is 11!
16.03.2004
8:19 Uhr
All manuals and user guides at all-guides.com
Tools required
(see B 1)
(see B 2)
(see B 3)
(see B 4)
(see B 9)
(see B 11)
Introduction
Seite 31
– Drill
– Screwdrivers
– Spanner / wrench
– Hair drier
– Soldering iron
– Solder
31
(see B 5)
(see B 6)
(see B 7)
(see B 12)
(see B 13)
(see B 14)