Parts Of The Turntable - Teac LP-R500 Manual Del Usuario

A turntable
B screw fixing the turntable for transportation
Before use, completely loosen the screw by turning it clockwise
with a coin or screwdriver.
Side view of the screw for transport
During transport
(when shipped
from the factory)
When you transport the unit, turn the screw counterclockwise to
secure the turntable.
C cue-lever
Use this lever to lift the tone arm.
D tone arm holder
Gently push the clamper to the right to release the tone arm.
E speed selector
Select the speed suitable for the record.
F tone arm
When you move the tone arm to inside, the turntable will begin
to turn.
12

Parts of the Turntable

G Cassette tape operation button
PLAY (y)
F.FWD (,)
REW (m)
STOP (H)
During use
PAUSE (J)
Never press the PLAY button (y) and REW button (m) at
the same time.
H Cassette holder
Set a cassette tape with the exposed tape in front and the side to
play facing up.
I TAPE switch
When playing a normal tape (type ! ), set the TAPE switch to
NORMAL. When playing a chrome tape (type @ ) or metal tape
(type !% ), set the switch to HIGH.
J INPUT switch
When PHONO/TAPE is selected by pressing the corresponding
button, use this switch to switch between "RECORD" and "TAPE".
When a record or cassette tape is playing, make sure to stop
playing prior to using the switch.
K
45 RPM adaptor
When playing a 45 RPM large hole single record, use the adaptor.
Slide the part of holding the adapter to the side.
Use this button to play a tape.
Use this button to fast-forward a tape.
Use this button to rewind a tape.
Use this button to stop playing a tape.
Use this button to suspend playing/recording temporarily.
Before use, detach the
stylus guard (white
plastic cover) by pulling it
straight off the front of the
cartridge in the direction of
the arrow.