Listening To A Record - Teac LP-R500 Manual Del Usuario

< Before use, completely loosen the transportation screw by
turning it clockwise with a coin and remove the stylus guard.
1 Press the PHONO/TAPE/AUX button once or twice to select
PHONO/TAPE.
2
Gently open the dust cover.
< When opening the cover, pay attention to prevent your hand
from getting caught.
3
Set the INPUT switch to PHONO.
16

Listening to a Record

adaptor
4 Put the record on the turntable.
When playing a 45 RPM large hole single record, use the included
adaptor.
5
Select the speed.
6 Gently push the clamper to the right to release the tone
arm.
7
Raise the cue lever to lift the tone arm off the tone arm
support.
clamper
tone arm
transportation screw
cue lever