brennenstuhl MULTI ADM 10050 MH Manual De Instrucciones página 12

Operating instructions
CHARGING THE RECHARGEABLE BATTERY
Only use one of the manufacturer's original charging device: Bosch, Dewalt, Festool, Flex,
Makita, Metabo (CAS), Milwaukee.
TRIPOD MOUNTING
By means of the holes in the holding bracket, the floodlight can be mounted on a
Brennenstuhl tripod.
If two floodlights are mounted, the accessory crossbar "CB 70 1172640059" is required.
SCOPE OF DELIVERY
Article 1173700001: Floodlight, plug-in connection cable, 6 multi adapters:
Bosch, Festool, Flex, Makita, Metabo, Milwaukee/Dewalt, Adapter bag.
Article 1173702001: Floodlight, plug-in connection cable.
ACCESSORIES
Suitable accessories are available on our homepage www.brennenstuhl.com.
CLEANING
Disconnect the product from the mains voltage and remove the battery before cleaning.
Do not use solvents, caustic cleaning agents or similar products.
Only use a dry or slightly moistened cloth for cleaning.
MAINTENANCE
ATTENTION: The LED lamp does not contain components that require maintenance.
The light source of this lamp cannot be replaced. If the light source has reached the end of
its service life, the entire lamp has to be replaced. The lamp may not be opened.
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner!
Electric appliances must not be disposed of in household waste!
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
rules that used electric appliances should be collected separately and recycled in an
environmentally friendly manner.
For possibilities of disposal of the used appliance, please contact your local or municipal
administration.
12
011522 BA_MULTI ADM 10050_10052 0533873.indd 12 011522 BA_MULTI ADM 10050_10052 0533873.indd 12
MULTI ADM 10050 MH / 10052 MH
26.04.22 12:54 26.04.22 12:54