Maintenance (Only For Qualified Personnel); Accessibility - Lotus PCI-94ET Guia Para La Intalación E Instrucciones De Uso

(the power part of the
generator is too hot)
Green LED on, red LED on
No heating
(the induction component under the pyroceram
is too hot)
Green LED on, red LED flashing
Green LED flashing, red LED off.
Poor heating
Green LED on, red LED flashing
Green LED on, red LED on
Heating of small metal
objects on the zone
Green LED flashing, red LED off.

MAINTENANCE (ONLY FOR QUALIFIED PERSONNEL)

Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance, remove the plug
or switch off the switch above the appliance.
To get to the junction-box, remove the front panel of the appliance. The control elements are reached from the front
control panel; unscrew the fixing screws from the control panel and remove it.
GB IE
Air inlet or outlet blocked.
Defective fan.
Unsuitable saucepan.
Empty cooking protection triggered
it to cool down. The fan
is over 220°C.
Cooking point sensor defective
.
Saucepan diameter under 160 mm
saucepan.
Saucepan not positioned
correctly and thus not recognised
The power component is too
hot and has switched on the power
reduction automatically
Internal temperature high due to insufficient cooling
Make sure hot air is not being sucked up.
It should not
Unsuitable saucepan.
Excessively fast increase in
pyroceram temperature. You could
be using an empty saucepan.
Saucepan recognition
not correctly regulated

ACCESSIBILITY

34
Check and clean air inlet
and outlet.
Call a technician.
Use a suitable saucepan.
Leave
temperature
Call a technician.
Use a suitable
Position the saucepan
correctly.
Make sure that the saucepan
is suitable.
exceed 40°C.
Replace with a suitable saucepan.
Adjust the power on the basis of the
quantity of food.
Call the technician.