Roger Beep - PRESIDENT BILL II FCC Manual Del Usuario

E) MENU
1) COLOR
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
select
microphone (3) to
4. Press then AM/FM key (7) to validate. The current color
symbol is displayed:
(cyan), (yellow),
5. Use s/t key (3) on the unit or UP/DN key (3) on the
change
microphone to
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
The default color is .
2) KEY BEEP
Some operations such as changing channels, pressure
on keys etc. are confirmed by a beep tone.
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
select
microphone (3) to
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the mi-
crophone to activate (On) /
the menu.
(orange), (green), (blue),
(purple), or (cyan light).
the color.
confirm and select another
confirm and exit.
exits the menu after 10 seconds.
the menu.
Deactivate
(OF) the function.
When the function is activated, "
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
7. The unit automatically
The default key beep value is ON.
is

3) ROGER BEEP

(short press)
The ROGER BEEP sounds when the PTT switch (11) of the
microphone is released in order to let your correspondent
speak. Historically as CB is a "simplex" communication
mode, it is not possible to speak and listen at the same
time (as it is the case with a telephone). "Once the con-
versation was over, "Roger" was said in order to indicate
"received" or "message understood". The word "Roger"
has been replaced by a significant beep. That is where
the words "Roger beep" comes from.
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
4. Press the AM/FM key (7) to validate.
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to activate
function. When the function is activated, " " is displayed.
6. Press the AM/FM key (7) to
is
menu or press the PTT switch (11) to
7. The unit automatically
*6 tones are available for the ROGER BEEP function.
The default roger beep value is OF.
13
" is displayed.
confirm and select
confirm and exit.
exits the menu after 10 seconds.
select the menu.
(1 to 6*) / Deactivate
confirm and select
confirm and exit.
exits the menu after 10 seconds.
another
is
(OF) the
another