Preparing The Appliance; Electrical Connection - Gaggenau AF 2 Serie Instrucciones De Uso Y Montaje

Ocultar thumbs Ver también para AF 2 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Body wall thickness: 3/4" (19 mm)
1
Fold out the tabs on both of the mounting
¨
pieces.
2
Screw the mounting pieces to the body on the
©
left and right.
3
Remove the tabs from the bottom of the
ª
mounting pieces.

Preparing the appliance

Insert the enclosed power cord into the appliance.
20

Electrical connection

9
WARNING
Risk of electric shock
Parts inside the appliance can have sharp
edges. The connection cable can be damaged.
Do not bend or pinch connection cables
during installation.
The necessary connection information is located on
the identification plate in the appliance interior,
remove metal grease filter to access it.
Length of the connecting cable: Approx. 4
(1.30 m)
This appliance meets EC radio interference
suppression requirements.
9
WARNING
Risk of electric shock
It must always be possible to disconnect the
appliance from the electricity supply. The
appliance must only be connected to a
protective contact socket that has been
installed correctly. If the plug is no longer
accessible following installation of the
appliance, or a fixed connection is required, an
all-pole isolating switch must be present on
the installation side with a contact gap of at
X
least
" (3 mm). The fixed connection may
only be installed by an electrician.
The branch-circuit breakers ampacity, the wire sizes
and the connections must conform to the
requirements of the National Electrical Code or
Canadian Electrical Code and all local codes and
ordinances.
This appliance is connected with a plug
Plug has to be conform with NEMA
CONFIGURATIONS FOR PLUGS AND
RECEPTACLES.
The appliance must be properly grounded.
Plug must be rated not less than type 6-20 P (2-
pole 3-wire grounding).
Only a qualified electrician should connect the
plug.
Install a socket outlet earthed in accordance
with regulations approx. 27" (700 mm) above the
floor behind the appliance. The socket outlet
must still be accessible after installation.
]
ft

Publicidad

Tabla de contenido
loading

Tabla de contenido