LIGHT ORIENTATION
115° Rotation
The Diffuser rotates 115°. Rotate to desired location
by using notch on the end cap.
CARE AND MAINTENANCE: Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
Good Earth Lighting
- 3 YEAR LIMITED WARRANTY: The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (3)
®
years from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential
environment. We will repair or replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, without
charge. Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call
1-800-291-8838 to obtain a return authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be accepted. The liability of the
manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage, labor costs or injury which is
caused by the product. This limitation upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental
or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the
product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or an
experienced radio/TV technician for help. FCC responsible party name : Good Earth Lighting, Inc. Address: 1400 E Business Center Drive, STE 108, Mount Prospect IL 60056, USA Telephone number: 1-800-291-8838
See Packaging for lighting summary and optimal growth recommendations. The information provided on the packaging should only be used as a suggestion. No guarantees of
plant health or yield are guaranteed or inferred with the use of these lights. Water, soil, fertilizers, temperature, environment, and other factors will impact plant health.
PROBLEM
1. Light does not come on.
2. Fuse blows or circuit breaker trips
when light is turned on.
REPLACEMENT PARTS LIST
Need Help?
Good Earth Lighting
1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
®
Good Earth Lighting
is a registered trademark of Good Earth Lighting, Inc. © 2021 Good Earth Lighting, Inc.
®
LISEZ TOUTE LA PROCÉDURE D'INSTALLATION AVANT DE COMMENCER !
AVERTISSEMENT : POUR ÉVITER TOUT RISQUE DE CHOC ÉLECTRIQUE, DÉBRANCHEZ LE
LUMINAIRE DE TOUTE SOURCE D'ALIMENTATION ÉLECTRIQUE AVANT DE COMMENCER
L'INSTALLATION.
AVERTISSEMENT:Ne tentez PAS d'altérer le luminaire. Il n'est pas fabriqué avec
des composants pouvant être remplacés ou réparés.
AVERTISSEMENT:RISQUE DE BRÛLURE ! Le luminaire peut être très chaud ; lais-
sez-le refroidir avant de le toucher.
AVERTISSEMENT: N'ALTÉREZ NI LA FICHE, NI LE CORDON pour l'installer. Ce
luminaire à DEL a une fiche polarisée (une broche est plus large que l'autre) afin de
réduire le risque de choc électrique. Cette fiche ne rentrera dans une prise de cou-
rant polarisée que d'une seule façon. Si la fiche ne s'enfonce pas complètement
dans la prise de courant, essayez de l'enfoncer dans l'autre sens. Si elle ne tient
toujours pas dans la prise, contactez un électricien professionnel. N'utilisez jamais
de barrette d'alimentation électrique, sauf si la fiche peut être insérée complètement.
Ne modifiez pas la fiche.
AVERTISSEMENT : Les produits doivent être installés en suivant ces instructions,
les codes locaux d'électricité et/ou le Code électrique national (CEN) en vigueur. Les
spécifications électriques sont indiquées à l'arrière du luminaire.
AVERTISSEMENT : N'utilisez PAS de cordon de rallonge. Utilisez SEULEMENT des
barrettes d'alimentation avec protection intégrale contre les surintensités.
AVERTISSEMENT: Ne regardez PAS directement les DEL pendant des périodes
prolongées.
Si vous avez des doutes quant à l'isolation du boîtier électrique, ou si boîtier est en plastique et n'a pas de fils de mise à la
terre, ou si vous ne savez pas comment mettre correctement à la terre un luminaire, consultez un électricien professionnel.
OPTIONAL: INSTALLING ADDITIONAL LIGHTS
Use installation steps 1-3 to install
additional units. To link, plug the cord into
the linking outlet of the preceding fixture.
A maximum of (10)
GL1324-WHT-18LFC-G fixtures can be
linked together in one run.
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
1. Power/light switch is off.
2. Power cord or Linking cord not properly
connected
3. Fixture not properly wired to junction box.
4. Bad switch.
1. Discontinue use immediately.
Hardware Kit: ZH-GL1324
Please visit our website at: https://goodearthlighting.com/contact-us or call the Customer Care Center
1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
AVERTISSEMENTS ET MISES EN GARDE
Turn off power before Linking
MISE EN GARDE :Utilisez cette lampe EXCLUSIVEMENT dans des endroits
où la température de l'air est comprise entre -18°C et 40° C / 0°F et 104°F.
MISE EN GARDE : Acheminez et fixez les cordons UNIQUEMENT de telle façon
qu'ils ne soient pas pincés ou endommagés. Ne suspendez RIEN aux cordons.
MISE EN GARDE : NE montez PAS sur des surfaces dont l'épaisseur est
inférieure à 1/4 po. NE montez PAS au-dessus d'éviers ou de poêles.
MISE EN GARDE : N'UTILISEZ PAS CE LUMINAIRE AVEC UN CIRCUIT
GRADATEUR. Il n'est pas possible d'atténuer l'intensité lumineuse de ce
luminaire.
MISE EN GARDE : Ne laissez pas de fils nus exposés.
Mettez hors tension avant de commencer toute opération de maintenance.
Pour emploi à l'intérieur seulement.
Approprié pour les endroits humides.
CORRECTIVE ACTION
1. Verify power supply and light switch are on.
2. Check cords connection.
3. Check wiring connections.
4. Test or replace switch.
1. Call customer service (1-800-291-8838).
3