KTM 63512932044 Instrucciones De Montaje página 29

5.1 Assembly
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
Luggage affects the handling, cornering and braking characteristics, particularly when fully laden, and
increases crosswind sensitivity.
–
Ride especially carefully in strong wind.
–
Slowly accelerate to the permitted maximum speed.
Maximum speed with luggage mounted
Warning
Danger of accidents Overloading, a one-sided payload, or the luggage slipping impairs handling characte-
ristics.
–
Comply with the maximum permitted payload.
Payload for each side case
–
Always use two side cases simultaneously and distribute the luggage evenly on both sides.
–
Secure the luggage to prevent it from slipping around inside the side cases.
Info
When cleaning with a pressure cleaner, maintain a distance of at least half a meter from the cases and
use a neutral cleaning agent (water with neutral soap).
150 km/h (93.2 mph)
10 kg (22 lb.)
Condition
Case rack 63512012044 is required for assembly (not included).
Mounting the locking cylinder
–
Insert springs
E
.
Info
The kit contains many small parts. It is recommen-
ded that you perform the assembly while seated at
a table.
500556-01
–
Insert wafers
A
bers ,
500557-01
6
(included) into chambers
7
(included) with the number 1 into cham-
C E
, and .
ASSEMBLY 5
A C
, , and
9