TOPDON BT20 Manual De Usuario página 10

4) The test result will appear soon.
Figure 5.5.4
① Back
② Real-Time Voltage
③ Test Result
④ Cranking Voltage: the battery voltage while the engine is starting
⑤ Cranking Time: the time a vehicle takes to start an engine
⑥ Tap Save to save the test result to your mobile device as an
image
⑦ Tap Share to share the test result with your coworkers and
clients
Charging Test
WARNING:
Always start the engine before performing the charging
test. The battery testing function only applies to 12V lead-
acid batteries.
1) Select Charging Test.
2) Start the engine and tap OK.
3) Increase the RPM to 2500 and tap OK.
EN I 18
4) Turn on the electronics and tap OK.
Figure 5.6.1 Figure 5.6.2
5) The test result will appear soon.
Figure 5.6.5
① Back
② Real-Time Voltage
③ Test Result
④ Loaded Voltage: The voltage measured when turning on the
on-board electrical appliances
Figure 5.6.3 Figure 5.6.4
EN I 19