Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Keep the device safe
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Press the disconnect button on the
high-pressure gun and disconnect
the high-pressure hose from the
high-pressure gun.
ATTENTION
Damage to the high-pressure hose
Damage to the high-pressure hose due
to incorrect direction of rotation
Observe the direction of rotation of the
hose reel when winding.
4. Stow the high-pressure hose on the
device.
5. Stow the mains connection and ac-
cessories on the device.
Before prolonged storage, observe ad-
ditional instructions, see chapter Care
and service.
Frost protection
ATTENTION
Risk of frost
Devices that are not completely emp-
tied can be destroyed by frost.
Fully empty the device and accessories.
Protect the device from frost.
The following must be met:
● The device is disconnected from the
water supply.
● The high-pressure gun is separated
from the high-pressure hose.
1. Switch on the device "I/ON".
14
2. Wait a maximum of 1 minute until no
more water comes out of the high-
pressure hose.
3. Switch off the device.
4. Store the device with all accessories
in a frost-proof room.
Care and service
DANGER
Risk of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is maintenance-free, so it is
not necessary to carry out regular
maintenance work.
Clean the sieve in the water
ATTENTION
Damaged sieve in the water connec-
tion
Damage to the device due to water
contamination
Check the sieve for damage before in-
serting it into the water connection.
If necessary, clean the sieve in the wa-
ter connection.
1. Remove the coupling from the water
connection.
2. Pull out the sieve with a pair of flat
pliers.
3. Clean the sieve under running water.
4. Insert the sieve into the water con-
nection.
English
connection