Kohler K-6350 Guia De Instalacion página 3

Hose
Connector
1. Install the Mounting Stud
- Remove the temporary nipple.
- Apply thread sealant and install a 1/2" NPT nipple to the bath
elbow. The nipple should extend 1/2" (1.3cm) beyond the finished
wall.
- Apply plumbers putty or other sealant to the inlet end of the spout
according to the putty manufacturer's instructions.
- Apply thread sealant to the nipple, and install the spout to the
nipple.
- Carefully tighten with a clean strap wrench and remove any excess
putty.
Kohler Co.
Hose
3
Faucet Body
Threaded Hole
Use For 6350
Mounting
Stud
A
1025490-2-