Kohler K-6350 Guia De Instalacion página 5

Hose
Connector
3. Install the Faucet
- If you have not already done so, move the faucet into the install
position.
- From the underside of the sink, position the bracket, washer, and nut
onto the mounting stud. Position the faucet and escutcheon on the
sink to obtain the desired alignment. Tighten the nut securing the
faucet to the sink. Use a ratchet wrench with 7/16" deep socket for
best access.
NOTE The weight must be installed to act as a pull stop, and to
:
prevent kinking damage to the hose.
- For best performance, attach the weight to the hose 23" (58.4cm)
from the loose end of the hose. The weight may be moved to adjust
the pull-out length of the hose. Carefully tighten the weight screws.
Do not overtighten.
- Reconnect the hose to the hose connector.
Kohler Co.
Bracket
Washer
Nut
Weight Screw
Weight
23" (58.4cm)
5
Hose
1025490-2-
A