Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section 2 - 27" Rear Console Dryers
Removing the Hamper Door Assembly
1.
Flip hinge latches up.
2.
Lift door up and away from dryer.
Removing the Console/User Interface
(UI) and Top Panel
WARNING
Electrical Shock Hazard
Disconnect power before servicing. Replace all
parts and panels before operating. Failure to
do so can result in death or electrical shock.
To Remove the Console
1.
Remove the three (3) Torx T20 1/4" hex-head screws from
top rear panel.
2. Slide thin plastic putty knife down between the console
assembly and top panel. Use your free hand to push back on
the top of the console.
7
Publicidad
Tabla de contenido
