Denon AVR-1802 Instrucciones De Operación página 17

7 Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
SELECT SELECT
or or
• PANORAMA setting
PANORAMA OFF
ON OFF
SELECT SELECT
or or
• DIMENSION setting
DIMENSION 3
0 3 6
SELECT SELECT
or or
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last
button was pressed and the setting will be completed.
Surround parameters q
Pro Logic II Mode:
The Cinema mode is the standard required mode for all A/V systems.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes ("Cinema", "Music" or "Pro Logic").
Panorama Mode:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phontom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/
OPTICAL) (see page 11).
EX:
DVD/VDP
3
(Main unit) (Remote control unit)
• CENTER WIDTH setting
CENTER WIDTH O
0 4 7
SELECT SELECT
or or
• DEFAULT setting
DEFAULT Y/N
Yes Y/N No
SELECT SELECT
or or
Select "Yes" to reset to the factory defaults.
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
1 3
B
1 4 2 2
w Set the input mode to "AUTO" or "DTS".
8
(Main unit) (Remote control unit)
2 Select the Dolby/DTS Surround mode.
SURROUND
MODE
(Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then press the SELECT knob and select
"DOLBY/DTS".
• The following appears on the display.
(DOLBY PLII, DOLBY PROLOGIC, DOLBY
DIGITAL, DTS)
SELECT
(Main unit)
3
Play a program source with the ,
• The Dolby Digital indicator
DIGITAL
lights when playing Dolby
Light
Digital sources.
4
Set the surround parameter according to the source.
First, press the SURROUND button.
NOTE: Please make sure the
SURROUND
"AUDIO" position of the
MENU
slide switch on the
remote control unit.
(Remote control unit)
CINEMA EQ OFF
Use the (left) and
(right) buttons to set the
CINEMA EQ.
(Initial)
(Remote control unit)
ON OFF
(left) button (right) button
SURROUND
Press the SURROUND or
MENU setting.
(Remote control unit)
CD MD/CDR
AUDIO VIDEO
POWER
AVR/AVC TV VCR DVD/VDP
ON
PHONO CD DVD/VDP
OFF 1 2 3
V. AUX VCR-1 VCR-2 TV/DBS 1
4 5 6 7
INPUT MODE CDR / TAPE TUNER SHIFT
1
8 9 0
SURROUND
TAPE · VCR
MODE
2
6 7
CHANNEL
0
3 2 0
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6 7
4, 5, 6, 7
SYSTEM SURROUND
SET UP MENU MASTER
CH SELECT VOL
4, 5, 6, 7
SELECT
T.TONE STATUS MUTING
RETURN DISPLAY
CHANNEL TV VOLUME
B
REMOTE CONTROL UNIT RC-897
mark.
• The DTS indicator lights when
Light
playing DTS sources.
The CINEMA EQ mode can be set directly
using the main unit's CINEMA EQ button.
• CINEMA EQ mode turns on
and off each times the
CINEMA EQ button
pressed.
(Main unit)
(down) button to switch to the D. COMP.
ENGLISH
is
17