Next Level Racing GT ELITE Manual De Instrucciones página 9

support@nextlevelracing.com
ALTERNATE PEDAL INSTALLATION
( )
FOR SHORTER USERS
16b
Align the holes on the Upright Connection Plates with the T-Nuts previously installed in Step 16a. Bolt
through and secure with 2 x M8 Bolts and Washers.
) Note: Do not tighten the
A
Pedal Plate until you have
your desired position.
17 A) Align the Large Pedal Plate with the T-Nuts previously installed in Step 15a.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
)
A
18 A) Align the Small Pedal Plate with the T-Nuts previously installed in Step 15a.
B) Bolt through and secure using 2 x M8 Bolts and Washers.
PARTS:
Repeat
on Other
• • 2 x M8 20mm Bolts
Side
• • 2 x M8 Washers
PARTS:
)
B
• • 4 x M8 16mm Bolts
Repeat
on Other
Side
• • 4 x M8 Washers
• • 1 x Large Pedal Plate
) PARTS:
B
• • 2 x M8 16mm Bolts
Repeat
on Other
Side
• • 2 x M8 Washers
• • 1 x Small Pedal Plate
16
PEDAL ADJUSTMENT RANGE
19 Loosen the Bolts on the Pedal Plates. Adjust to your desired position using the alignment lines and
tighten the Bolts to lock in the Pedal Plates.
20 Align the holes on the Pedal Adjustment Fins with the T-Nuts previously installed in Step 01b. Bolt
through and secure using 2 x M8 Bolts and Washers. Repeat on the other side.
PEDAL ANGLE ADJUSTMENT
Repeat
on Other
Side
21 Adjust the pedal assembly to your desired angle and align the T-Nuts previously installed in Step 15a
with the holes on the Pedal Adjustment Fins. Bolt through and secure with M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
Repeat
• • 4 x M8 16mm Bolts
on Other
Side
• • 4 x M8 Washers
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
17