Checking For Blockages - Uline Shark Rotator Lift-Away Manual Del Usuario

CHECKING FOR BLOCKAGES

HOSE AND TUBES
Remove floor nozzle, dust cup and hose and shine a
flashlight in all the intake openings to check for possible
blockage.
BOTTOM OF FLOOR NOZZLE
1. Using a coin, turn the
locking screws to the
unlock position and pull
up to expose the airway.
Remove any obstructions,
close and relock.
(See Figure 28)
2. Remove any string,
carpet fibers or hair
that may be wrapped
around the brush roll.
(See Figure 29)
HOSE CUFF AT BASE OF POD
1. Squeeze tabs and
remove hose.
(See Figure 30)
PAGE 8 OF 27
MAINTENANCE CONTINUED
Figure 28
Figure 29
Tabs
Figure 30
2. Tilt elbow down 90º.
(See Figure 31)
3. Press elbow release latch.
(See Figure 32)
4. Remove elbow and
check for blockages.
(See Figure 33)
5. Replace elbow by
inserting gasket end
back into opening and
clip back into latch.
Figure 31
Figure 32
Figure 33
0622 IH-10108