Upright Cleaning - Uline Shark Rotator Lift-Away Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Insert handle into the
top of the wand and
attach flex hose to base
of the pod. (See Figure 3)

UPRIGHT CLEANING

1. Press POWER to clean bare floor surfaces or area
rugs.
NOTE: The brush roll will not spin in this mode.
(See Figure 5A)
Figure 5
A
2. Press POWER and BRUSH ROLL to clean carpets. The
brush roll indicator lights will illuminate green. If a
jam occurs, the indicator light on floor nozzle will
illuminate red. Refer to Maintenance on page 8 for
instructions on removing blockages. (See Figure 5B)
PAGE 3 OF 27
ASSEMBLY CONTINUED
Figure 3
B
OR
4. Insert the crevice tool
and multi-tool into the
accessory clips.
(See Figure 4)
5. Tuck the hose between
the two accessory clips.
(See Figure 4)
OPERATION
3. Place left foot gently on
the floor nozzle and tilt
the handle back to start
cleaning.
NOTE: The brush
roll will only spin
once the vacuum is
reclined back.
(See Figure 6)
Figure 4
Figure 6
0622 IH-10108

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

H-10108

Tabla de contenido