Technical Specifications; Operation And Installation; Initial Commissioning - brennenstuhl Power Jet-Light 4 x 36 W Instrucciones De Uso

Power Jet-Light 4 x 36 W IP54

5 Technical specifications

Device:
Protection class:
Power supply:
Cable:
Length of cable:
Dimensions (H x W x D):
Weight:
Protection class:
Max. load:
Rated current:
Lamp:
Power input:
Lamp:
Protection class:

6 Operation and installation

IMPORTANT: Observe the following directions, the safety instructions in particular, in
order to prevent incorrect operation and possible defects.
6.1

Initial commissioning

Step Operation
1
Figure 2: Commissioning
Fix the socket in the middle of the mounting bracket. Mount lamp as shown in
figure 2.
The angle of the working light can be adjusted with the adjusting screws.
IMPORTANT: Check all screw connections prior to initial commissioning.
2 Press ON/ OFF button. The working lamp will be switched on or off.
Instruction manual
Power Jet - Light 4 x 36 W
Art. no. 1 17266 0
IP 54 (dustproof, waterproof)
230 V~ 50 Hz
Rubber cable H07RN-F 3G1.5
approx. 5 m
approx. 520 x 375 x 110 mm
6.0 kg
I
max. 3500 W
max. 16 A
up to 4 x 36 W (lamp)
4 x 36 W, PL compact lamp
II
Pos. Description
4 Adjusting screw
10 Mounting bracket
11 Washer
12 Spacer
13 Casing
14 Toothed lock washer
Table 3: Commissioning
15 GB