Info Menu; Taking Measurements - MIETHKE 75100000 Instrucciones De Uso

| INSTRUCTIONS FOR USE
GB

INFO MENU

The following information can be called up from
the info menus:
· Hotline & Service
· System Details
· Manufacturer Info
· Language SD-Card
Press to open the info menu.
The following information is displayed on the
screen:
preselected submenu
Fig. 7
Preselect the desired submenu with the
keys and
. Return to the previous menu by pres-
sing .
Submenu content
Hotline & Service
· Hotline & Service
· Tel: +49 331 620 83-0
System Details
· Product name: Reader Unit for Sensor Re-
servoir
· Article number: 7502 0000
· Serial number: XXXXX
· Software version: 2.0X
· Service date: dd/mm/yyyy
Manufacturer Info
Manufacturer:
Christoph Miethke GmbH & Co. KG
Ulanenweg 2 | 14469 Potsdam
Germany
38
scroll bar
, and confirm with
Reader Unit Set for SENSOR RESERVOIR

TAKING MEASUREMENTS

Press to open the menu.
The following information is displayed on the
screen:
Fig. 8
Press to open the submenu <measure-
ment>.
The following information is displayed on the
screen:
Fig. 9
There are three types of measurement:
1. Single measurement: The mean of 8-10
measurements is displayed and saved to the
SD card.
2. Continuous measurement: The sequence of
single measurements within the selected time
interval is shown as a time diagram and save
to the SD card.
3. Fast measurement: The sequence of un-
averaged single measurements at the maxi-
mum available measurement rate (approx. 40
measurements per second) is shown as a time
diagram and save to the SD card.