Operation Of The Reader Unit; General Operating Instructions - MIETHKE 75100000 Instrucciones De Uso

Reader Unit Set for SENSOR RESERVOIR
ding display and speaker volume
· Check battery status; if necessary, plug in po-
wer supply unit and charge battery.
The following is displayed on the screen:
Fade-in "Selftest ..."
Fade-in "booting ..."
The following start-up screen
is then shown
Fig. 5a
The following is displayed on the screen of the
reader unit during operation with the mains po-
wer supply unit:
Fig. 5b
Note: The control lamp of the reader unit po-
wer supply must be on!
· Check system time, correct if necessary, see
chapter on "Settings".
· Activate the On/Off switch
Display for operation with
reader unit power supply
.
INSTRUCTIONS FOR USE |

OPERATION OF THE READER UNIT

Key
A Date
B Time
C SD card
D Assignment of memory space (on SD card)
E Battery status
F Info/OK key
G Downward navigation
H Menu key
A B C
Fig. 6 F
Activate reader unit with On/Off switch
Start screen content is displayed (see Fig. 7).

GENERAL OPERATING INSTRUCTIONS

The menu-controlled operation of the device
uses the four function keys. The context-related
function of these soft keys is indicated by the
symbols shown on the display for each of these
keys. The exact meaning of these symbols is
explained in the list of "Reader unit display sym-
bols" on p. 34/35.
The preselected submenu is highlighted by a
frame. For improved navigation, the currently
selected position in the submenu is highlighted
by a scroll bar in addition to the frame. The keys
for standard operation
Note: When not in use, the reader unit swit-
ches to stand-by mode within 1-5 minutes,
depending on setting.
GB
D E
G H
and are used
37