Control Unit; General Safety Standards - Aprimatic CONTROL NK Instrucciones Para La Instalación Electrica, El Uso Y El Mantenimiento

CONTROL UNIT

1. DESCRIPTION
1.1 ENVISAGED USE AND FIELD OF APPLICATION ............ 15
1.2 TECHNICAL FEATURES AND DATA .................................. 15
2. SYSTEM PREPARATION AND POWER SUPPLY
3. POSSIBLE OPERATING MODES
3.1 AUTOMATIC MODE ............................................................. 17
3.2 AUTOMATIC STOP OPERATION - DOOR STOP FOR
MECHANICAL EMERGENCY DOOR OPENER (OPTIONAL) 17
3.3 EMERGENCY OPERATION (OPTIONAL PE PUSHBUTTON) . 17
3.4 MASTER/SLAVE (M/S) MODE ............................................ 17
3.5 FIRST INPUT OPERATION (OPTIONAL) ........................... 17
3.6 WING CONTACT WITH AN OBSTACLE ............................. 17
4. BASE SYSTEM CONNECTIONS
4.1 NK CONTROL UNIT ............................................................. 18
4.2 KEY SELECTOR (SC6 - SC6EC) ........................................ 18
4.3 OPTIONAL ACCESSORIES ................................................ 20
4.4 MASTER/SLAVE (M/S) FUNCTION .................................... 20
5. START-UP
5.1 SETTINGS (DP1 DIP-SWITCH GROUP) ........................... 22
5.2 ADJUSTMENTS (TRIMMERS) ............................................ 23
6. NOTES FOR USERS AND THE MAINTENANCE TECHNICIAN
INSTRUCTION MANUAL INTRODUCTION
Information
THESE INSTRUCTIONS ONLY CONCERN THE ELECTRICAL INSTALLATION
CONTROL NK
AND USE OF THE
.
DOORS WITH SLIDING WINGS
RELEVANT INSTRUCTIONS PROVIDED
DURING THE ASSEMBLY AND INSTALLATION OF THE AUTOMATION AND THE
,
TESTING OF THE DOOR YOU CAN BE INJURED IF YOU DO NOT OBEY THE
SAFETY WARNINGS IN THIS MANUAL
CAREFULLY BEFORE ANY OPERATIONS
AVAILABLE WITH THE SYSTEM SO THEY CAN BE CONSULTED FOR ALL
USE AND MAINTENANCE PURPOSES
ALL THE DATA IN THE MANUAL MUST BE CONSIDERED PURELY INDICATIVE
THE MANUFACTURER DECLINES ANY RESPONSIBILITY FOR POSSIBLE
INACCURACIES IN THE PRESENT MANUAL DUE TO MISPRINTS OR TYPING
.
ERRORS THE COMPANY RESERVES THE RIGHT TO MODIFY THE PRODUCT
AND MAKE ANY IMPROVEMENTS WITHOUT GIVING PRIOR NOTICE

GENERAL SAFETY STANDARDS

CAREFULLY READ THE INSTRUCTIONS BEFORE STARTING TO INSTALL THE
.
PRODUCT
!
Warning
PACKING MATERIALS
.)
ETC MUST NOT BE DISPERSED IN THE ENVIRONMENT AND MUST NOT
BE LEFT WHERE CHILDREN CAN FIND THEM AS THEY ARE A POTENTIAL
.
SOURCE OF DANGER INCORRECT INSTALLATION OF THE UNIT MAY
.
CAUSE SERIOUS DANGER FOLLOW ALL THE INSTALLATION INSTRUCTIONS
.
CAREFULLY ONLY SPECIALISED TECHNICIANS
,
JOB SHOULD INSTALL THE PRODUCT
,
SERVICE AS WELL AS CARRYING OUT THE PERIODIC CHECKS AND ANY
.
MAINTENANCE
Information
WE STRONGLY RECOMMEND FOLLOWING A SPECIALISED TRAINING COURSE
INSTALLERS SHOULD CONTACT THE SUPPLIER FOR INFORMATION ON
.
COURSES
WE RECOMMEND OPERATING IN A WELL
IN COMPLIANCE WITH THE SAFETY REGULATIONS IN FORCE
RECOMMEND THE USE OF APPROVED PROTECTIVE CLOTHING
,
SHOES PROTECTIVE GOGGLES
ARTICLES OF CLOTHING THAT COULD GET CAUGHT
SAFETY MEASURES TO PREVENT THE RISK OF INJURY CAUSED BY SHARP
SPLINTERS AND THE POSSIBLE RISKS OF CRUSHING
. !
OR AMPUTATION CAUTION USE SAFETY LADDERS
PAY SPECIAL ATTENTION WHEN HANDLING THE COVER GUARD SO THAT IT
DOES NOT FALL OR KNOCK AGAINST ANY COMPONENTS OR PERSONS
,
DUE TO THE MOVING TRAVERSING AND ROTATING PARTS
COVER GUARD IS DISMANTLED OR OPEN
, ,
GETTING YOUR HAIR CLOTHES
.
MACHINE PARTS COMPONENTS UNDER LOAD AND NOT PROPERLY FIXED
MAY FALL DOWN TO THE FLOOR
ELEMENTS HAVE BEEN ASSEMBLED
WE RECOMMEND STRICT OBSERVATION OF THE NATIONAL REGULATIONS
FOR SAFETY IN WORK SITES
COORDINATED WITH LEGISLATIVE DECREE
92/57/
OF DIRECTIVE EEC CONCERNING THE MINIMUM RULES AND
SYSTEM FOR CONTROLLING AUTOMATIC
FOR MECHANICAL INSTALLATION SEE THE
.
.
READ THE INSTRUCTION MANUAL
.
THE INSTRUCTIONS MUST BE
.
( ,
PLASTIC POLYSTYRENE
,
TRAINED TO DO THE
,
TEST AND PUT THE DOOR INTO
-
LIT AND HEALTHY ENVIRONMENT
, ).
GLOVES AND HELMET DO NOT WEAR
.
TAKE ADEQUATE
,
KNOCKS AND CUTS
,
WORK IN PAIRS AND
,
WHEN THE
,
THERE IS GREAT DANGER OF
.
OR CABLES ETC CAUGHT IN THE MOVING
.
WHEN THE SUPPORTING AND SLIDING
,
FIX THEM IN PLACE IMMEDIATELY
(
IN ITALY LEGISLATIVE DECREE
"
494/96
IMPLEMENTATION
CONTROL NK
15
16
17
18
22
24
REGULATIONS ON HEALTH AND SAFETY AT WORK TO BE OBSERVED WHEN
WORKING ON TEMPORARY OR MOBILE SITES
YOU MAY CONSULT THE SAFETY GUIDE FOR INSTALLING PEDESTRIAN
SLIDING DOORS ON OUR WEBSITE
CORDON OFF THE YARD TO PREVENT ANY UNAUTHORISED PERSONS FROM
PASSING THROUGH THE WORKING AREA
AREA UNATTENDED
,
INSTALLATION ELECTRICAL CONNECTIONS AND ADJUSTMENTS MUST
BE CARRIED OUT IN A PROFESSIONAL MANNER IN COMPLIANCE WITH
THE GOOD MANUFACTURING AND WORKMANSHIP REGULATIONS IN
FORCE IN THE COUNTRY WHERE THE AUTOMATION IS INSTALLED
THE MANUFACTURER OF THE DEVICE IS NOT RESPONSIBLE FOR THE
-
NON OBSERVANCE OF PROFESSIONAL STANDARDS OF WORK IN THE
CONSTRUCTION OF THE POWER
DAMAGE WHICH MAY BE CAUSED BY THE USE OF THE DRIVE
.
INCORRECT INSTALLATION MAY BE DANGEROUS
FOLLOW THE MANUFACTURER
BEFORE STARTING THE INSTALLATION
AND THAT THE EXISTING STRUCTURE IS SUITABLY STRONG AND STABILE
.
ALSO ENSURE IT COMPLIES WITH CURRENT STANDARDS FOR THE
.
SECTOR
Caution
TO THE AUTOMATION MUST BE INSTALLED BY AN EXPERT AND QUALIFIED
,
ELECTRICIAN IN ACCORDANCE WITH NATIONAL STANDARDS OF THE
,
INSTALLATION COUNTRY
BEFORE CONNECTING THE ELECTRICAL MAINS MAKE SURE THAT THE
DATA ON THE RATING PLATE CORRESPONDS TO THE SPECIFICATIONS OF
THE ELECTRIC MAINS SUPPLY
THE PROTECTIVE MEASURES ON THE PRIMARY COIL MUST BE ADOPTED
.
ON SITE
6
USE A
DIFFERENTIAL SWITCH
ARRANGE AND FASTEN CABLES WITH THE SPECIAL CLAMPS
BEFORE CARRYING OUT ANY MAINTENANCE OR REPAIRS OR REPLACING
,
ANY PARTS WHETHER MECHANICAL OR ELECTRICAL
MAINS POWER SUPPLY
THE AUTOMATION CANNOT BE TESTED AND PUT INTO SERVICE UNTIL THE
SLIDING DOOR HAS BEEN VERIFIED AS COMPLYING WITH THE STANDARDS
.
OF MACHINERY DIRECTIVE
,
DOOR FITTED AND INSTALLED
ALL TIMES USE AND KEEP THE TECHNICAL DOSSIER OF THE AUTOMATIC
,
DOOR AND MUST FOLLOW ALL OF THE PROVISIONS CONTAINED IN IT
.
THE END OF THE WORK THE INSTALLER MUST CHECK THE INSTALLATION
WE
(
HAS BEEN CARRIED OUT CORRECTLY AND THE AUTOMATION WORKS
SAFETY
.
PROPERLY
THE RISKS CONNECTED TO THE OPERATION OF THE SLIDING DOOR MUST
BE ASSESSED MAKING SURE THERE ARE NO DANGEROUS CRUSHING
OR SHEARING POINTS
MUST BE TAKEN AND ALL OF THE SIGNS REQUIRED BY THE REGULATIONS
IN FORCE TO WARN OF ANY DANGEROUS ZONES MUST BE ATTACHED
.
EVERY INSTALLATION MUST CLEARLY INDICATE THE ID DATA FOR THE
-
POWER DRIVEN SYSTEM
THE INSTALLER MUST PROVIDE ALL THE INFORMATION ABOUT THE
,
AUTOMATIC MANUAL AND EMERGENCY FUNCTIONING OF THE POWER
DRIVEN DOOR AND DELIVER THE CORRESPONDING INSTRUCTIONS TO THE
.
SYSTEM USER ONLY USE ORIGINAL SPARE PARTS FOR ANY REPAIRS OR
.
FOR REPLACING PARTS
THE GUARANTEE IS VOID IF THIS PRODUCT IS USED IN COMBINATION
528/99
WITH OTHERS OF OTHER BRANDS
DECLINES ANY RESPONSIBILITY IF COMPONENTS INCOMPATIBLE WITH
SAFETY AND CORRECT OPERATION ARE INSTALLED
- 14 -
").
: .
WWW APRIMATIC
.
DO NOT LEAVE THE WORKING
.
-
DRIVEN STRUCTURE
.
' .
S INSTRUCTIONS
,
CHECK THE PRODUCT IS INTACT
THE ELECTRICAL SYSTEM SUPPLYING POWER
( ).
46/90
FOR ITALY LAW
.
- 30
MA AS MAIN SWITCH
OVERLOAD
.
,
2006/42/
EEC TO WHICH THE COMPLETE
, .
IS SUBJECT THE INSTALLER MUST AT
.
IF NECESSARY SPECIAL PREVENTIVE MEASURES
.
.
.
THE MANUFACTURER OF THE DRIVE
. .
COM
.
,
NOR FOR ANY
.
.
.
.
,
DISCONNECT THE
.
AT
.
-
.