Pairing the device with a Bluetooth
To play audio files via Bluetooth
been paired with a compatible Bluetooth
♦
Set the main switch
appears briefly on the device display
♦
Press the
display
playback device. The Bluetooth
first use.
Set the Bluetooth
♦
devices. A detailed description of how to do this can be found in the
operating manual for your Bluetooth
♦
Select the entry
Bluetooth
connect the two devices. If the pairing is successful, you will hear a beep
and the Bluetooth
NOTICE
►
The next time you turn on the party loudspeaker, it will connect automati-
cally to the most recently connected Bluetooth
Bluetooth
party loudspeaker, you will have to manually re-establish the connection to
your Bluetooth
this can be found in the operating manual for your Bluetooth
device.
If you want to connect the device to another Bluetooth
►
pressing the
the currently connected Bluetooth
Alternatively, you can deactivate the Bluetooth
Bluetooth
LED
Bluetooth
If you use a smartphone as your Bluetooth
►
playback will be paused when there is an incoming call. Acceptance/termi-
nation of the call is carried out via the smartphone. After finishing the call,
playback of the audio file will resume automatically.
During music playback in Bluetooth
►
operated using the
buttons on the device.
Note that while in Bluetooth
►
the Bluetooth
■
40
│
GB │ IE
to the position to switch the device on.
button repeatedly until
. You will hear a sequence of beeps and the Bluetooth
flashes blue. The device is ready to be paired with a Bluetooth
playback device so that it scans for Bluetooth
®
from the list of found devices on your
®
playback device and, if required, enter the code
®
LED
®
playback device does not automatically reconnect to the
®
playback device. A detailed description of how to do
®
(Bluetooth
)
playback device. You will hear a beep and the Bluetooth
®
flashes blue. The device is now ready to be paired with another
®
playback device.
®
playback device.
®
playback device
®
, the party loudspeaker must previously have
®
playback device.
.
and
®
function is activated automatically on
®
playback device.
flashes blue.
®
playback device. If your
button for about 2 seconds to disconnect
®
playback device from the device.
®
function on the connected
®
playback device, the audio
®
mode, the basic functions can be
,
and
®
mode, you can also set the volume using
are shown on the
®
LED
®
®
to
®
playback
®
device, start by
®
SPLB 44 A1